Your Cooperative - Safety - Washington EMC

Washington EMC

Page Content Utility Links Main Links Footer Links Local Links Back to Full Site

Your Cooperative


A Matter of Life & Death

Lineman following Safery Protocalls

Electricity provides necessities and luxuries that certainly add to the quality of our lives. However, carelessness with electricity can unfortunately result in burns, injuries or even death.

Similar to lightning, electricity is always striving to find a path to the ground. Should any part of your body come in contact directly or indirectly with an energized object, you have provided that pathway to the ground and, therefore, are in immediate danger


Washington EMC encourages you to remember the following safety rules:

  • Consider any electrical lines dangerous. Keep all objects (example: kites, ladders and antennas) away from power lines.
  • Do not attempt to raise or move electric lines.
  • If your utilities are underground, call the Utilities Protection Center (UPC) before digging. UPC will request that Washington EMC and your other utilities mark underground lines. Remember, it’s the law that you must call UPC before digging!
  • Report to Washington EMC any potential power line hazards, including trees growing into the lines.
  • Always stay away from any electric line down on the ground. Call Washington EMC immediately.
  • Never touch a person or object that is in contact with a power line.


The “Utility Protection Center” or UPC takes requests for all utilities with overhead and underground equipment. It’s a FREE call. All you do is give your name, address, type of work, and telephone number, then UPC will contact each utility listed for your area. UPC will also give you a verification number to prove you called in accordance with Georgia Law.

Under Georgia Law, each utility has 72 hours (3 days) to locate their facilities. The days do not include holidays and weekends. Calls after 3 p.m. EDT will begin the three day rule the next working day. Also remember when working within the vicinity of overhead lines, call the UPC just like calling before you dig.

Training Provided by Washington EMCTRAINING

Washington EMC provides continuous training to all employees on a regular basis. Training ranges from in-house programs, having a specialists come to train, even have our employees go to statewide programs, and sometimes other electric utilities

Linemen and Safety Ambassadors for Washington EMC

The Occupational Safety and Health Administration (OSHA) enforces regulations on industry to meet certain guidelines for employee safety. Washington EMC continually updates our employees on new regulations and work practices through training programs.


Poly-chlorinated biphenyl’s or PCB’s is a component of old oils used in electrical equipment. The United States Navy began using PCB’s in transformer oils aboard naval ships. PCB’s were added to the oils to prevent fires from occurring. Later it was discovered that PCB’s were toxic to the environment and subsequently were banned in 1972. Since then, no equipment could be manufactured with this element in the oil. In spite of the ban, some equipment was manufactured with the residue in clean oil. Washington EMC takes an active attitude about PCB’s and removes any equipment found to have this agent in the oil. If you believe there is a piece of equipment leaking, please contact our office immediately. Our response team will review the site and take the appropriate action.

Transrupter Training Washington EMC

Our Commitment

Washington EMC is conscientious about the safety of the public and employees. Should you see any employee, truck, or our contract employees creating a hazard to you, the public, or another employee, please report it by telephone at (800) 552-2577.